Jgun dual speed screwdriver - Hytorc
Dual speed screwdriver - Hytorc
Jgun dual speed torque screwdriver - Hytorc
Dual speed screwdriver - Hytorc
Jgun dual speed screwdriver - Hytorc
Dual speed screwdriver - Hytorc
Jgun dual speed torque screwdriver - Hytorc
Dual speed screwdriver - Hytorc

JGUN DUAL SPEED HYTORC PNEUMATIC TORQUE SCREWDRIVERS

Following the success of its first range of pneumatic torque screwdrivers, HYTORC created a division dedicated to screwdrivers called TORQUE GUN Company in 2009. The JGUN Dual Speed pneumatic screwdriver adds a high speed to the first line of torque screwdrivers allowing it to reach 465 rpm. Since the speed of an air-operated gearbox is not as fast as that of a bolting machine, the addition of an approach speed on the JGUN screwdrivers was a convincing move to controlled tightening.

This makes it possible to install and tighten bolts quickly and precisely, even in the ATEX zone. The JGUN Dual Speed pneumatic torque screwdriver adds this approach speed to all the advantages of the JGUN Single Speed on models from 3/4″ square to 1 1/2″ and covering torques from 265 to 11,200 N.m.

quote online download the technical manual

50 years of experience

in industrial clamping solutions

Quick quote

Response within 24 hours of receiving your request

Delivery within 24 hours

as soon as the order is validated

Description > Features > Adjustment charts >

Features of the JGUN Dual Speed pneumatic torque screwdriver

  • 3/4″ to 1″1/2″ conductive square
  • Tightening and loosening torque up to 11.200 N.m
  • Approach speed up to 465 rpm
  • Reversing Tightening/loosening by selector
  • Approach/Torque speed selector with knurled rotating ring
  • Torque adjustment by air pressure adjustment (on remote FRL unit*)
  • Air vane motor
  • Coaxial Reaction Splines suitable for clamping without Reaction Arm with Hytorc Z Washers, Hytorc Clamp Nuts or with Coaxial Arm
  • Ergonomic design with light alloy frame
  • Delivered in a Case with Coaxial Reaction Arm, Calibration Certificate and exhaust silencer
  • Option : Rear safety paddle for double control mobilizing both hands of the operator to start the machine
  • 1 year warranty

* The use of a HYTORC Filter Regulator Lubricator (FRL) unit treating the compressed air and supplied separately is strongly recommended for the correct operation of the screwdriver and its adjustment according to the manufacturer’s chart.

Gallery: examples of use

Technical data Jgun Dual Speed Hytorc torque screwdriver download the technical manual
Dimension jgun ds - Hytorc
JGUN DUAL SpeedMin. torque [N .m]MAX torque [N .m]SquareSpeed Approach [tr/min]Speed Torque [tr/min]Weight [Kg]H [mm]W [mm]L [mm]D [mm]
JGUN-A.5-AP2636803/4"420244,11887625566
JGUN-A1-AP4231 7243/4"1206,54,41887627366
JGUN-A2-AP7052 7631"905,06,821411431883
JGUN-A3-AP1 1254 1631"352,05,41918131783
JGUN-A5-AP1 6476 7851"1/2382,510,2214114372105
JGUN-A8-AP2 81811 2221"1/2351,513,0215114391116
JGUN DUAL Speed
JGUN-A.5-AP
Min. torque [N .m]
263
MAX torque [N .m]
680
Square
3/4"
Speed Approach [tr/min]
420
Speed Torque [tr/min]
24
Weight [Kg]
4,1
H [mm]
188
W [mm]
76
L [mm]
255
D [mm]
66
JGUN DUAL Speed
JGUN-A1-AP
Min. torque [N .m]
423
MAX torque [N .m]
1 724
Square
3/4"
Speed Approach [tr/min]
120
Speed Torque [tr/min]
6,5
Weight [Kg]
4,4
H [mm]
188
W [mm]
76
L [mm]
273
D [mm]
66
JGUN DUAL Speed
JGUN-A2-AP
Min. torque [N .m]
705
MAX torque [N .m]
2 763
Square
1"
Speed Approach [tr/min]
90
Speed Torque [tr/min]
5,0
Weight [Kg]
6,8
H [mm]
214
W [mm]
114
L [mm]
318
D [mm]
83
JGUN DUAL Speed
JGUN-A3-AP
Min. torque [N .m]
1 125
MAX torque [N .m]
4 163
Square
1"
Speed Approach [tr/min]
35
Speed Torque [tr/min]
2,0
Weight [Kg]
5,4
H [mm]
191
W [mm]
81
L [mm]
317
D [mm]
83
JGUN DUAL Speed
JGUN-A5-AP
Min. torque [N .m]
1 647
MAX torque [N .m]
6 785
Square
1"1/2
Speed Approach [tr/min]
38
Speed Torque [tr/min]
2,5
Weight [Kg]
10,2
H [mm]
214
W [mm]
114
L [mm]
372
D [mm]
105
JGUN DUAL Speed
JGUN-A8-AP
Min. torque [N .m]
2 818
MAX torque [N .m]
11 222
Square
1"1/2
Speed Approach [tr/min]
35
Speed Torque [tr/min]
1,5
Weight [Kg]
13,0
H [mm]
215
W [mm]
114
L [mm]
391
D [mm]
116

request your quote online

quote in line

50 years of experience

in industrial clamping solutions

Quick quote

Response within 24 hours of receiving your request

Delivery within 24 hours

as soon as the order is validated

Accessories
Impact sockets - Hytorc
Impact sockets

HYTORC IMPACT SOCKETS HYTORC torque tools with conductive squares exploit the strength of the squares...

voir >
Offsetlinks - Hytorc
Offset Links

HYTORC LINKS OFFSET CARTRIDGE SYSTEM A HYTORC Offset Link is a tightening accessory that allows the...

voir >

A technical need?

Ask our HYTORC experts for advice

With 50 years’ experience in clamping solutions for industry, we have faced and solved almost every problem.

Nous contacter