The JETPRO 18.3 SA is our high-performance hydraulic pump, designed to work efficiently with our largest hydraulic systems. Its 4-stage motor provides 30% more oil flow without increasing operating temperature, thanks to an innovative integrated oil cooling system. Its compact design with a 7.5L tank relieves weight restrictions and offers efficient mobility to the operator.
50 years of experience
in industrial clamping solutions
Quick quote
Response within 24 hours of receiving your request
Delivery within 24 hours
upon confirmation of the order
| Characteristic | Value |
|---|---|
| Power | 380V – 460V (6 Amp) |
| Pressure gauge | 0-10 k PSI (+/-1% Accuracy) |
| Tank capacity | 2 gals. / 7.5 l |
| Floors | 3 |
| Weight | 64 lbs. / 29 kg |
| Max Oil Flow | 1,070 cu.in./min. / 18 l/min. |
| Oil cooler | Yes |
| Chassis Protection | Yes |
| Remote control 4.5 m | Yes |
request your quote online
50 years of experience
in industrial clamping solutions
Quick quote
Response within 24 hours of receiving your request
Delivery within 24 hours
upon confirmation of the order
AVANTI HYTORC HYDRAULIC TORQUE WRENCH The AVANTI hydraulic torque wrench introduces a major...
see >
STEALTH HYTORC HYDRAULIC TORQUE WRENCH The STEALTH hydraulic torque wrench introduces a major...
see >
HYTORC HIGH PRESSURE HYDRAULIC HOSES The hydraulic wrenches being systems with double-acting...
see >
Need technical assistance?
Ask our HYTORC experts for advice
With 50 years of experience in the field of clamping solutions for industrial applications, we have encountered and resolved almost every problem imaginable.
Contact usIf all HYTORC Hydraulic Wrenches deliver their maximum torque at 700 bar during the piston thrust phase, the return of the piston is always done at low pressure. The maximum flow rate value at 70 bar is therefore useful, as it will indicate the speed of the wrenches during the first cycles, which do not require much torque, and during the piston return phases, which together account for the vast majority of time spent using hydraulic wrenches. However, hydraulic technology means that the flow rate drops very rapidly with increasing pressure, and this affects wrench speed.
On the JETPRO 9.3 pump there are 3 hydraulic stages which means that the decrease in hydraulic pressure is not sudden once the threshold of 80-100 bars is passed. There is an intermediate threshold at around 280 -300 bar below which the pump delivers a flow rate of more than 2.3 L/min without dropping directly to around 0.9 L/min up to 700 bar. Although the last push cycles to reach the pressure corresponding to the final tightening torque are slower, this represents only a small proportion of the overall operating time of the hydraulic pumpand wrench, but the time saved by the intermediate stage is not negligible for production rates or large-scale sites.
With its double effect four outlet hydraulic valve, the JETPRO 9.3 HYTORC pump is ready for the SIMULTORC. Simply connect four wrenches to the pump, adjust the pressure and you have a consistent tightening on your bolted joint. This allows you to avoid pinching the gasket when tightening sealing flanges or to maintain proper alignment when coupling rotating machinery. With four wrenches or even with only 2, the time savings on tightening procedures are high by reducing the number of intermediate passes before the final torque is applied. If you have a hydraulic wrench and a JETPRO 9.3 pump for your regular needs, you can rent three wrenches or just one to perform critical operations at a lower cost.
