In a concern of continuous improvement, HYTORC has developed the pneumatic torque screwdriver JGUN DIGITAL which revolutionizes the pneumatic screwdrivers with torque multiplier by integrating two major innovations directly on the torque screwdriver: the display of the torque in N.m on a control screen and the pressure regulator The pneumatic screwdriver JGUN DIGITAL becomes the most portable and mobile of the market because it can work directly connected to the compressed air network or a compressor without intermediate system.
The operator sets the torque directly in N.m and no longer needs to look for the torque-pressure correspondence chart of his tool to set it for his tightening operation. The JGUN DIGITAL range is available in square drive tools from 3/4″ to 1″1/2 for torques from 80 to 10 700 N.m.
50 years of experience
in industrial clamping solutions
Quick quote
Response within 24 hours of receiving your request
Delivery within 24 hours
upon confirmation of the order
Gallery: examples of use
request your quote online
50 years of experience
in industrial clamping solutions
Quick quote
Response within 24 hours of receiving your request
Delivery within 24 hours
upon confirmation of the order
HYTORC LINKS OFFSET CARTRIDGE SYSTEM A HYTORC Offset Link is a tightening accessory that allows the...
see >
Need technical assistance?
Ask our HYTORC experts for advice
With 50 years of experience in the field of clamping solutions for industrial applications, we have encountered and resolved almost every problem imaginable.
Contact usBy placing the air regulator at the bottom of the handle in the form of a simple ring to be turned HYTORC has simplified the pneumatic clamping tool to perfection. The adjustment is made directly on the screwdriver, directly in N.m. and does not require any intermediate accessory between the compressed air network of your workshop or your compressor and the pneumatic torque screwdriver JGUN DIGITAL. By eliminating the need for the FRL for the JGUN DIGITAL screwdrivers, HYTORC greatly simplifies the use of pneumatic screwdrivers.
Generally, any pneumatic torque screwdriver must be accompanied by a Filter Regulator Lubricator to condition the air that will feed the pneumatic motor and especially to regulate the torque. This external unit to be connected between the source and the screwdriver must filter the impurities in the air, add the appropriate amount of oil to lubricate the air motor for the compressed air processing part. For the regulator part, you have to turn a knob to adjust the air pressure which is indicated by a digital or needle gauge located on the FRL. To know which adjustment to make, it is essential to have the correspondence chart of the screwdriver and not to have modified the air hose between the FRL and the screwdriver. And when you need to change the torque, you have to go back to the FRL to make that adjustment.
