HYTORC tightening tools are simple to use, but develop very high torque or tension forces.
It is important to master their operation in order to understand each step of the preparation, tightening or loosening and removal of the tool(s) for each bolt.
With the HYTORC tool manuals you will be able to identify the equipment, configure and adjust it to carry out your tightening operation in complete safety.
Hydraulic wrenches are a special kind of tightening tool that is simple to use but not necessarily intuitive for everyone.
This is why a start-up training and user manuals are there to explain their operation and make the operators autonomous with these tools very quickly.
It is obvious that a hydraulic wrench does not work on its own and that it must be powered by a hydraulic pump. The user’s manual therefore details the settings and the control of the pump that controls the tightening with the wrench(s).
All adjustments to be made on the wrench to correctly position the reaction arm, reconfigure it to go from tightening to loosening are detailed.
A pneumatic screwdriver is very simple to use with a gun shape and a trigger to control the tightening.
The Pneumatic Screwdrivers Manual details the change of direction from tightening to loosening as well as the torque adjustment which is done on the screwdriver for the DIGITAL version or from the separate FRL unit for the conventional JGUN versions.
Since pneumatic tools are powered by compressed air from a compressor or an external network, the user’s manual explains the FRL’s settings for conditioning the compressed air so as not to prematurely wear out the screwdriver’s air motor.
If the HYTORC torque screwdrivers resemble in form more or less to those that everyone can have in his toolbox, the features are much more advanced while maintaining a very intuitive use.
The manual of the HYTORC electric screwdrivers allows to set all advanced tightening modes and restricted access to the settings according to the permission levels depending on the model.
If the operator can carry out all the conventional tightening and loosening operations in a very intuitive way with the various buttons and selectors arranged ergonomically on the body of the screwdriver, he will find in the HYTORC manual the information to record the tightening data for the traceability of the tightening operations for example or to recover a tightening parameter setting already pre-stored in the screwdriver
The conventional HYTORC Hydraulic Pumps do not have a user’s manual as their operation is detailed in the manuals of the hydraulic wrenches they supply.
They are delivered with a spare parts manual with hydraulic diagram and oil safety sheet.
For automatic pumps or pumps with data logging systems or advanced tightening systems such as torque and angle or yielding, a user’s manual is provided to explain the setup and use of these features.
